Assembly Procedure - Sharp AL-2021 Service Manual

22) Remove the screw and the E-ring, and remove the PS semi-cir-
cular earth plate and the PS roller unit.
23) Remove the E-ring and remove the spring clutch from the PS
roller unit.
4) 4)
PS roller unit
PS semi-circuler
PS semi-circular
earth plate
earth plate
1) 1)
2) 2)
3) 3)
24) Remove three screws and remove the TC front paper guide.
2)
5) 5)
Use grease of
Floil FG40H
only to apply to
this section.
4) 4)
1)
AL-2041 DISASSEMBLY AND ASSEMBLY 8 - 12
25) Remove the screw and the connector, and remove the PPD1
sensor PWB.
1)
2)
26) Remove two E-rings and remove the paper feed roller.
27) Remove three E-rings and remove the clutch unit.
5)
Clutch unit
Paper feed
roller
4)
3)
2)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
Back
4)
Front
1)