Advantech VITA-350E User Manual page 38

This page is the main settings page for VITA-350E. These values will be
recieved first when the VITA-350E is searched. There are several groups
in this page. These groups include: Host Serial Port, Device Date/Time,
GSM/GPRS Options, GPRS Baud Rate, COM Baud Rate, H/W Reset,
Screen Emulator Quality, ACC Power Off Delay, Platform Options, Volt-
age Source, and Server Options.
3.2.3.1 Host Serial Port group
The Host Serial Port combo-box : Assigns the PC connected COM port
ID. All available serial ports will be a item in this list. You should select
an available serial port and connect VITA-350E to this port.
3.2.3.2 Device Date/Time group
The Get Time button in the Device Date/Time group : Gets the current
time from VITA-350E.
The Set Time button in the Device Date/Time group : Sets the PC current
time to VITA-350E.
3.2.3.3 GSM/GPRS Options group
The GSM Mode combo-box in GSM/GPRS Options group : Selects the
AT-command or GPRS mode for GSM module. If the mode is set to
GPRS, the M2M engine will automatically connect the AP station with
the specified APN, phone number. If the mode is set to AT-command, the
M2M engine will open the GSM module port with the specified baud
rate.
The Baud Rate combo-box in GSM/GPRS Options group : Selects a baud
rate for the GSM module. It is only used on AT-command mode.
APN edit in GSM/GPRS Options group : Specifies the APN name when
GPRS mode is selected. The default value is Internet.
Phone Number edit in GSM/GPRS Options group : Specifies the phone
number when GPRS mode is selected. The default is *99***1#.
The Set button in GSM/GPRS Options group : Sets GSM/GPRS options
for VITA-350E.
3.2.3.4 GPS Baud Rate group
The GPS Baud Rate combo-box in GPS Baud Rate group : Defines the
baud rate of the GPS module. This is fixed and should not be changed by
users.
The COM Baud Rate combo-box in COM Baud Rate group : Defines the
baud rate of VITA-350E COM module. This COM via VITA-350E is
connected and defined by the user.
VITA-350E User Manual 30