Advertisement
LOOSE LEAF STEPS
Peparing Material
For the first technique, exploit the advantages of the
basic Cera system to simplify the task by drying the
material. Grind your botanicals and cure (dry) them
well. Removing the water before is important, it has
to be very dry to vape well (the water has to be evap-
orated off first, robbing vaping power in the process).
Loading Material
Load the Cartridge with a medium to fine
grind of the material. Fill Cartridge to the brim
and lightly pack the material down. Place the
Top Cap and Mouthpiece over the Cartridge.
Warm Up
Warm Up
Proceed with a 20-30 second warm up time. This is done
Proceed with a 20-30 second warm up time. This is done
by turning on the device by depressing and holding the
by turning on the device by depressing and holding the
momentary Switch. Follow up with a very slow and steady
momentary Switch. Follow up with a very slow and steady
inhale, while keeping the power on. It is important to note
inhale, while keeping the power on. It is important to note
that the hot air needs to contact and circulate the cham
that the hot air needs to contact and circulate the cham-
ber air, bringing the material up to vaping temperature. the
ber air, bringing the material up to vaping temperature. the
quicker the draw, the cooler the chamber will become,
quicker the draw, the cooler the chamber will become,
while a slower draw will warm up the chamber; each user
while a slower draw will warm up the chamber; each user
will find their own preference.
will find their own preference.
Advertisement
