Advertisement
LED Indication:
Power
ON/OFF
FLASH
AUTO SCAN
ON/OFF
AUTO JUMP
ON/OFF
1, 2, 3, 4
ON
FLASH
Panel Button Function:
Power:
System activate/ standby.
AUTO SCAN: Auto scan function activated/disabled.
AUTO JUMP: Auto jump function activated/disabled.
DIMMER: LED brightness adjustment.
1, 2, 3, 4: Currently select input signal channel and disable auto scan function.
Remote Control Operating A,B Mode Switching:
There are two remote control operating modes: When this device power on, you could
switch A,B mode by pressing the panel "power" button and remote control " *" button
together.
Mode A operating mode: It come with auto scan & auto jump functions.
Mode B operating mode: When auto scan & auto jump functions no need to use, which only
need single button for quick operation on AV switch.
Factory default is set to (Mode A).
IR remote control Mode A Operating:
Power symbol
▲ ▲ ▲ ▲
▼ ▼ ▼ ▼
◀ ◀ ◀ ◀
▶ ▶ ▶ ▶
1、 、 、 、 2、 、 、 、 3、 、 、 、 4 (5， ， ， ， 6， ， ， ， 7)
0
#
MENU、 、 、 、 ENTER、＊、
、＊、(5， ， ， ， 6， ， ， ， 7)、 、 、 、 8、 、 、 、 9
、＊、
、＊、
IR remote control Mode B Operating:
Power symbol
▲ ▲ ▲ ▲
▼ ▼ ▼ ▼
◀ ◀ ◀ ◀
▶ ▶ ▶ ▶
1、 、 、 、 2、 、 、 、 3、 、 、 、 4 (5， ， ， ， 6， ， ， ， 7)
#
MENU、 、 、 、 ENTER、＊、
、＊、
、＊、(5， ， ， ， 6， ， ， ， 7)、 、 、 、 8、 、 、 、 9、 、 、 、 0 Reserved (no function).
、＊、
Auto Scan Function:
Under auto scan operation, if the selected input video signal disappears over 0.5 second, it
would automatically select the previous or next input with video signal.
Auto Jump Function:
Under auto jump operation, if there is a new video signal input, it will automatically switch
to a new video signal input.
LED brightness setting:
LED brightness could be set up as the following 4 levels:
1 Minimum Brightness
2 Normal Brightness
3 Maximum Brightness
4 Brightness auto change
System activate/ standby.
Panel button or IR remote control disabled by remote PC.
Auto scan function activated/disabled.
Auto jump function activated/disabled.
Currently selected input signal channel.
No signal input.
System activate/standby.
Select next available input and activates auto scan function.
Select previous available input and activates auto scan function.
Select previous input and disable auto scan function.
Select next input and disable auto scan function.
Currently select input and disable auto scan function.
Auto jump function activated/disabled.
LED brightness adjustment.
Reserved (no function) .
System activate/standby.
Select next input and system activate.
Select previous input and system activate.
Select previous input and system activate.
Select next input and system activate.
Currently select input and system activate.
LED brightness adjustment.
4
Advertisement
