CONTENTS 1. Safety Instructions ................. 3 2. Technical Specifications ..............5 3. How To Set The Unit ............... 6 3.1 Control panel ................6 3.2 Main Function ................8 4. Control By Universal DMX Controller ..........14 4.1 DMX 512 Connection .............. 14 4.2 Address Setting ...............
COUGAR 12Z 1. Safety Instructions Please read carefully the instruction, which includes important information about the installation, usage and maintenance. WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
Page 5
Please make sure there are no flammable materials close to the unit while operating as it is fire hazard. Please use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always by taking its base. ...
COUGAR 12Z For 230V 50Hz power supply, maximum fixtures that can be connected on one power cable is 8; For 120V 60Hz power supply, maximum fixtures that can be connected on one power cable is 4; Caution: There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself.
◇ Ideal for stage, theatre, TV studio, rental and discotheques Input Voltage: AC 100V~240V, 50/60Hz Power Consumption: 198W LED Sources: OSRAM OSTAR RGBW 12 × 10W LED Beam Angel: 10°~60° Dimension: 263.3×183×340.4mm Weight: 7.5Kgs 3. How To Set The Unit 3.1 Control panel Front View Rear View...
Page 8
COUGAR 12Z LED: 2. POWER Power On 3. DMX DMX input present Button: 4.MENU To select the programming functions To go backward in the selected 5.DOWN functions To go forward in the selected 6. UP functions 7. ENTER To confirm the selected functions 8.
14. DMX OUT (5-pin XLR): For DMX512 link, use 5-pin XLR cable to link the next unit. 3.2 Main Function To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the function by the ENTER button and the display will blink. Use the DOWN and UP button to change the mode.
DMX Address Select DMX Address, press the ENTER button to confirm, the present address will blink on the display. Use the UP and DOWN button to adjust the address from 1 to 512. Once the address has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
Page 12
COUGAR 12Z Mode 2(Square Law): Light intensity control is finer at low levels and coarser at high levels. Mode 3(Inverse Square Law): Light intensity control is coarser at low levels and finger at high levels. Mode 4(S-cure): Light intensity control is finger at low levels and high levels and coarser at medium levels.
Page 13
menu mode. Back Light Select Back Light, press the ENTER button to confirm, present mode will blink on the display. Use the DOWN and UP button to select the On (LED on) or Off (LED off) mode. Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any change press the MENU button again.
COUGAR 12Z wish to test, press the ENTER button, use the DOWN and UP button to adjust the values (0~255). Once finished the test, press the ENTER button to save, go back to the functions without any change press the MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the menu mode.
Firmware Version Select Firmware version, press the ENTER button and the display will show the version of software of the unit. To go back to the functions press the MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the menu mode.
Page 16
COUGAR 12Z 1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable. 2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.
4.2 Address Setting If you use a universal DMX controller to control the units, you have to set DMX address from 1 to 512 so that the units can receive DMX signal. DMX Address Press MENU button to enter menu mode, select the , press ENTER button to confirm, the present address will blink on the display, use UP and DOWN button to adjust the address from 001 to 512, press the ENTER button to save.
COUGAR 12Z 4.3 DMX 512 Configuration 14 Channels Mode: CHANNEL VALUE FUNCTION DIMMER 000-255 0%~100% STROBE 000-019 Closed 020-024 Open Strobe 1 (fast slow) 025-064 065-069 Open Strobe 2: opening pulse (fast slow) 070-084 085-089 Open Strobe 3: closing pulse (fast slow)
Page 19
BLUE (0% 100%) 000-255 WHITE (0% 100%) 000-255 COLOR WHEEL EFFECT 000-009 Open 010-014 LEE 790 – Moroccan Pink 015-019 LEE 157 – Pink 020-024 LEE 332 – Special Rose Pink 025-029 LEE 328 – Follies Pink 030-034 LEE 345 –...
Page 20
COUGAR 12Z Clockwise, fast slow 180-201 202-207 Stop (this will stop wherever the color is at the time) Counter-clockwise, slow fast 208-229 230-234 Open Random color 235-239 Fast 240-244 Medium 245-249 Slow 250-255 Open 000-255 ZOOM (000 = 60°, 255 = 10°) beam...
Page 21
205-209 Open Strobe 9: sine wave (fast slow) 210-224 225-229 Open Strobe 10: burst (fast slow) 230-244 245-255 Open 000-255 000-255 PAN FINE 000-255 TILT 000-255 TILT FINE 000-255 PAN/TILT SPEED (000 = fast, 255 = slow) PAN/TILT MACRO 000-007 008-015 Macro 1 016-023...
Page 22
COUGAR 12Z 224-231 Macro 28 232-239 Macro 29 240-247 Macro 30 248-255 Macro 31 RED (0% 100%) 000-255 GREEN (0% 100%) 000-255 BLUE (0% 100%) 000-255 WHITE (0% 100%) 000-255 COLOR WHEEL EFFECT 000-009 Open 010-014 LEE 790 –...
155-159 LEE 021 – Gold Amber 160-164 LEE 778 – Millennium Gold 165-169 LEE 135 – Deep Gold Amber 170-174 LEE 164 – Flame Red 175-179 Open Color wheel rotation effect Clockwise, fast slow 180-201 202-207 Stop (this will stop wherever the color is at the time) Counter-clockwise, slow ...
COUGAR 12Z 1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly. 2. If the DMX LED is on and no response to the channel, check the address settings DMX polarity. 3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit or the previous one.
Page 25
Clean with soft cloth using normal glass cleaning fluid. Always dry the parts carefully. Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55103-1: 2009 ; EN55103-2: 2009; EN62471: 2008; EN61000-3-2: 2006 + A1:2009 + A2:2009; EN61000-3-3: 2008. &...
Need help?
Do you have a question about the COUGAR 12Z and is the answer not in the manual?
Questions and answers