Advertisement
15.
Place t h e wider portion of the saw base on that part of the workpiece which
is solidly supported, not on the section that
will
fall off when the cut is made.
As examples, Fig. 5 illustrates the RIGHT way t o cut o f f the end of
a
board,
and Fig.
6
the WRONG way.
If
the workpiece is short or small, clamp it down.
DON'T TRY TO HOLD SHORT PLACES BY HAND!
___
Fig.
\
Fig. t
16.
Never attempt t o saw with the circu
lar saw held upside d o w n in a vise.
This is extremely dangerous and can
lead t o serious accidents.
Fig.
;
17. Before setting the tool d o w n after completing a cut, be sure that the lower
(telescoping) guard has closed and the blade has come t o a complete stop.
7
Advertisement
