Table of Contents
Advertisement
• Verify that you have set up the Phone Kit properly.
• Charge the battery.
Q5.
Why is the audio quality poor sometimes ? (crackles/echoes, etc.)
A5.
There may be interference from nearby electrical appliances or the Wireless
Link USB dongle is installed in a room with thick walls. If this is the case, move
the PC to a different location. If the handset is too far from the Wireless Link
USB dongle, move the handset closer.
Q6.
Why can I not hear the other party clearly? Why is the speaker too loud/
too quiet?
A6.
The speaker volume on your PC or on the handset may be set too low. Adjust
the volume to get better effect.
Q7.
Why does the phone not ring when a call comes in?
A7.
The ringer may be off or too small to hear. Adjust the volume of the ringer.
Q8.
Why does the contact list/user status return a "NO SERVICE" message?
A8.
This may be caused by not starting or logging into Skype™ properly. Verify that
you are logged into Skype™ and the program is running properly.
Another cause may be that the WP0001 Utility or Wireless Link USB
dongle driver has not been launched on the PC, or the dongle plug may be
disconnected. Verify that the WP0001 Utility and Wireless Link USB dongle
driver are functioning properly and that the dongle plug is properly connected.
Also, verify that the PC is not in standby/hibernate mode.
Q9.
Why can I not call an ordinary phone number?
A9.
If 00, + or 011 is omitted, enter 00, + (double press
011 before the number you are dialing. If your Skype™ account
hastoo little or no credit left, purchase more credits on the Skype™
website. The handset may have lost its link. Verify that the handset
has a link with the Wireless Link USB dongle.
Q10. Why am I not getting any tone response from Skype™?
A10.
Either the Skype™ or the PC application have not started, the USB dongle
is not plugged in, your PC is in standby/hibernate mode, or your other party
is offline.
WP0001 Wireless Music Phone
key) or
A-21
Advertisement
Table of Contents
