Phone Configuration - VanAccess WP0001 Manual

2.2.1
1. Click the Phone Configuration tab or
Configuration status.
2. wp Utility will detect the phone
configuration status, as shown in
the picture on the right:
and
that the phone configuration is
successful.
the phone or the Wireless Link
USB dongle is not connected to
your computer, or the phone is
not on. If
check the connection again and
make sure to turn the phone on.
Important. You need to press Configuration button to reset the phone
if you connect the phone to another computer or the IP address of your
computer changes. The system will automatically detect your phone
setting if you restart your computer or replug the Wireless Link USB
dongle.
WP0001 Wireless Music Phone

Phone configuration

icons indicate
icon indicates
icon appears,
icon to display the phone
2-13