Change Password; Restore Factory Settings - DBL Technology HT-912T User Manual

4.2. Change Password

Include "Ordinary user-level" (user) and "Administrator Class" (admin), input the new
password two times, click "change" is ok.

4.3. Restore factory settings

If you make sure that clean all configurations, click "OK", wait start again. If not,
click "Cancel", back to current page.
Notes: All the users' personal configuration include new changed password will be
cleaned.
You also finish these by pressing "RESET" in a long time.
4.4. Reboot the system
If you are sue to reboot the system, click "OK", if not, then click "Cancel", back