Configuration Mode - DBL Technology HT-912T User Manual

B) Display Name
When you call your friend John, then his phone will show you call.
C) SIP Proxy
Use to fill address of SIP Proxy. If your SIP Proxy is special port (is not the default
5060), you can notes in the back of IP Proxy or Domain. Such as: 192.168.2.1:5070 or
tester.com.cn:5070.
D) SIP Registration Server
Use to register account for the Gateway, and fill the IP or Domain of SIP Registration
Server. If your server is special port (is not the default 5060), you can notes in the
back of IP Proxy or Domain. Such as: 192.168.2.1:5070 or tester.com.cn:5070.
E) Outbound Proxy
Exist in the firewall/NAT. It is used to make signaling and stream can penetrate the
firewall.
F) Ownership of the domain
Use to manage the Domain Management Host of SIP protocol.
G) Certification ID
Use to fill the certification account that the Gateway logins on the SIP registration
server.
H) Password
Use to fill the certification password when the Gateway logins on the SIP
registration server.
I) Dialing Rules
Please refer to "Dialing Rules".
J) Backup Server
Use to register backup, when user have a Backup registration server, then can
choose this option. If the Backup registration server is enable, while the main server
is failure unexpectedly, the Gateway will register to the Backup server
automatically.
K) Line Fax
Not support.

3.3.3.3.1. Configuration Mode

The configuration mode of FXS VOIP channel: 1) Single configure; 2) Configure by
line; 3) Configure by group