Advertisement
If there is any problem in the communication the following error message will appear:
This message informs you that communication with the processor has not been achieved. In this
situation you should check the selected serial port is the correct one and that the processor is in its
main menu.
CAUTION!
The processor must be in its main menu to enable communication with the computer.
2.3. Software removal
The removal of the LMS244 software from your computer conforms to the usual Windows practice for
removal of programs.
From the Control Panel, choose Software and then Add/Delete Program. Select RAM Audio LMS244
and select Add/Delete.
It is advisable to keep a safety copy of all configuration files that have been created (with extension
*.dsc) in order to be able to use them at a later date.
3. Editing the LMS244
3.1. Main screen
On starting the LMS244 software, the main working screen appears, showing the internal processing
routing. The route followed by an audio signal from the input to the outputs seen on this user-interface,
is the order in which processing takes place in the device. From this main screen it is possible to
directly access all available configuration parameters.
Menu
System
Icon
If the software is started without being connected to the LMS244, the Icons on the Tool Bar will not be
available and will appear in a grey colour. The Status bar will show: Offline.
RAM Audio LMS244 Digital Controller
Tool Bar
Configuration
Icons
Status Bar
4
Advertisement
