Audio/Game Port Connector - AZZA-XFX 845S-AV User Manual

Hardware Installation
2.8.4.



Parallel Port Connector (LPT)
2.8.5. Universal Serial Bus (USB) Port 1 & 2
Connector: CN 6 (USB 1)/ CN 7 (USB 2)
Type: 4 pin female
Two USB ports are available for connecting
USB devices. The
equipped with an expansion connector that
supports two additional
connectors. (The USB cable is not included


with the mainboard).

2.8.6. Audio/Game Port Connector

SPK-OUT LINE-IN
50% *
Jumpers are built on the mainboard to allow the user flexibility to configure the
mainboard settings to meet their specific requirements. When there is no
jumper cap inserted into the jumper it is called "OPEN." When a cap is inserted
into the jumper it is known as a "SHORT." Next page is an example of a short
setting on a jumper.
Page 20 845S-AV MAINBOARD


Connector:
Type:
This parallel port is used by printers
which support the SPP, EPP and ECP
modes IRQ7 or IRQ5 can be se-
lected. The ECP mode will use either
DMA 3 or DMA 1 (which can be se-
lected by the BIOS setup program).
mainboard is also
USB external
Connector:
Type:
The Game/MIDI port connector is a
dual purpose connector. It can either
be used to connect a joystick to the
computer for game participation, or it
can be used to attach an external
MIDI device. All these motherboards
have 3D audio interfaces onboard.
MIC-IN
CN 5
25 pin female.


USB 2
USB 1
CN 18
15 pin female
Ver 3.x