Hardware Installation
Installation Checklist (Continued)
System Panel Buttons and LED Connectors
PW
Power On/Off and Suspend Switch Connector.
HL
HDD LED Connector
RS
Reset Button Connector
-45?)0
$
-@
*.#
)
,-
=85
$1<324
,-
#$-
8#
).
)
,-
#$
,-
##2
''
You need to complete the following installation steps before you use your PC.
•
Check and set the mainboard settings.
•
Install the Central Processing Unit (CPU).
•
Install the memory modules.
•
Install the expansion cards.
•
Connect the ribbon cables, panel wires and power supply.
•
Setup the system BIOS
Note: Before you start installing your mainboard we strongly recommend that you use a
grounded anti-static mat. We further recommend that you attach an anti-static wrist-
band, which is grounded at the same location as the mat to your wrist.
845S-AV MAINBOARD
Page 11
Ver 3.x