Get Console Airconsole User Manual page 29

When Airconsole remote access is set to ENABLED it will attempt to connect to the
Private Server cloud service and once successful, tunnel its serial port to Private Server
via its APClient interface, or if that has not been connected, its Bridged interface. The
Airconsole must have a valid default gateway in order to route out to the configured
Private Server IP address.
Airconsole will try every 60 seconds to make a connection to the configured Private
Server IP or hostname. Note if a hostname is specified, then the DNS server that
Airconsole is using should be able to resolve the hostname to an IP address.
If the connection to the Private Server is successful, then a session key will be shown in
the Status (Home) page of the Airconsole and also the Airconsole will be visible on the
Private Server portal page