Get Console Airconsole User Manual page 10

The default username and password are both "admin".
From the webpage you can perform the following tasks
- Change the wireless parameters such as the SSID, the password, or the encryption
method
- Change the default serial port baud rate, data and parity bit settings and flow control.
Note that all of these settings can be also changed in Get Console, the webpage is
just used to change the default settings if using with a terminal that does not fully
support RFC2217 extensions.
- Change the IP address of the LAN that Airconsole operates on, including disabling
the built in DHCP server and enabling DHCP client or static addressing.
- Viewing the device log files
Enable Airconsole to act as an "AP Client" to join an existing WIFI network in
-
addition to its own WIFI
- Enable Airconsole to concurrently share its serial port to a Get Console Private
Server directly
- Changing the administrative username and password to access the webpage
- Reset the Airconsole back to its factory settings
- Upgrade the Airconsole firmware