flexbar Z10 Manual page 10

Mounting the Viewing Head
1. Insert the viewing head into the optical body and secure it into place using a 2mm allen
key to tighten the screw.
Installing the Eyepieces
1. Remove the dust caps from the eyepiece tubes.
2. Insert the eyepieces into the eyepiece tube. Be sure to install the eyepieces all the way
into the tube.
3. Set the eyepiece diopter scale for each eyepiece to 0.
250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com
Z10 SERIES STEREO MICROSCOPES
10