Related Manuals for flexbar 6.3:1
Summary of Contents for flexbar 6.3:1
- Page 1 Flexbar 6.3:1 ZOOM STEREO MICROSCOPE MANUAL 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 (P) • 631-582-8487 (F) www.flexbar.com • sales@flexbar.com...
-
Page 2: Table Of Contents
DETAILED ASSEMBLY PROCEDURE ................6 ADJUSMENT AND OPERATION ADJUSTING BINOCULAR VIEWING HEAD ..............8 FOCUS ADJUSTMENT ....................9 SPECIFICATIONS ......................10 TROUBLESHOOTING ......................11 MAINTENANCE........................12 SERVICE ..........................12 WARRANTY ........................12 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... -
Page 3: Safety Notes
4. Store the instrument in a cool, dry environment. Cover the microscope with the dust cover when not in use. 5. Flexbar microscopes are precision instruments which require periodic servicing to maintain proper performance and to compensate for normal wear. A regular schedule of preventative maintenance by qualified personnel is highly recommended. -
Page 4: Introduction
6.3:1 ZOOM MICROSCOPE INTRODUCTION Congratulations on the purchase of your new Flexbar microscope. Flexbar microscopes are engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if used and maintained properly. Flexbar microscopes are carefully assembled, inspected and tested by our staff of trained technicians in our New York facility. -
Page 5: Assembly
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts or touching glass surfaces. Eyepieces Binocular Head Lock-screw Power Cord Stand 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... -
Page 6: Detailed Assembly Procedure
3 Avoid placing the instrument in a dusty environment. When not in use, cover the microscope with the dust cover. 4 Keep the microscope on a flat and stable surface. Fig. 3 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... - Page 7 Fig. 5 Using the Glass Stage (Fig. 5) Set the glass stage plate ⑨ on the center of the base, and secure the slide with the two clips ⑩. Fig. 6 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com...
-
Page 8: Adjusment And Operation
115mm, the binocular head bracket ⑤ can be mounted onto higher or lower positions according to your needs by removing the clamping bolt with the Allen wrench provided. 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... -
Page 9: Focus Adjustment
Before moving the microscope, be sure to remove any slide/samples. When moving the microscope, hold the stand and base as shown in Fig. 10 to keep it level. Fig. 10 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... -
Page 10: Specifications
Visual Field Total Visual Field (mm) (mm) Magnification Magnification (mm) Magnification 8-50X 27.5-4.4 12-75X 20.0-3.2 16-100X 15.6-2.5 0.5X 4-25X 55.0-8.8 6-37.5X 40.0-6.4 8-50X 31.2-5.0 43.5 16-100X 13.8-2.2 24-150X 10.0-1.6 32-200X 7.8-1.3 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... -
Page 11: Troubleshooting
Loosen it to a suitable position The image is obscure because of the The focusing knob is to o loosen Tighten it to a suitable position head slipping down during observation 250 Gibbs Road, Islandia, NY 11749 • 631-582-8440 • www.flexbar.com... -
Page 12: Maintenance
Flexbar distributor or Flexbar at (631) 582-8440. This warranty is limited to the continental United States of America. All items returned for warranty repair must be sent freight prepaid and insured to Flexbar, 250 Gibbs Road, Islandia, NY 11749 – USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of America.
Need help?
Do you have a question about the 6.3:1 and is the answer not in the manual?
Questions and answers