DISASSEMBLY INSTRUCTIONS (Main Unit)
Dismantling of the bottom Panel
1) press the buttons as shown in gure 1 and take up the cable cover to move it.
2) Loosen 11 screws "A" as shown in gure 2.
Figure 1
Dismantling of the SCART+USB+LED Board
1) Loosen 2 screws " B " and loosen 1 screws " C " to remove SCART Board as shown in gure 3 & gure4.
2) Loosen 2 screws "D " to move USB board as shown in gure 5.
3) Loosen 1 screw " E " to move LED board as shown in gure 6.
D
Figure 5
3 - 1
A
Figure 2
B
Figure 3
C
Figure 4
E
Figure 6
Dismantling of the Main+DIN Board
1) Loosen 4 screws " F " to remove Main Board as shown in gure 7.
2) Loosen 1 screw " G " to remove DIN Board as shown in gure 8.
F
Figure 7
Dismantling of the Display Board
1) Loosen 2 screws "H" to remove Display board as shown in gure 9.
Dismantling of the Touch Sensor Board
1) Loosen 5 screws " I " to remove Touch Sensor board as shown in gure 10.
3 - 1
G
Figure 8
H
Figure 9
I
Figure 10