Samsung AW0503B Service Manual page 17

Disassembly and Reassembly Procedure
No. Part Name
4 CASE EVAP
UP & ASSY
EVAP
5 Blower
6 Case Cond &
Fan Propeller
& Motor Fan
4-6
(AW0803B/AW0805B)
Procedures
1.Take the case evap up forward carefully.
2.Remove 4 screws fixed on the plate
evaporator casing and evaporator.
1.Lift up the evaporator carefully.
2.Remove 2 screws on the plate evaporator
casing and partition.
3. Lift up the plate evaporator casing.
4.Remove the nut and remove the Blower.
1.Remove 2 screws on the base pan, and all
screws fixed on case cond.
2.Pull up the condenser from the base pan.
3.Remove the nut and remove the Propeller
fan.
4.Remove the screw fixed on the partition and
earth screw fixed on the base pan, then take
out the motor backward.
Remarks
Samsung Electronics