Advertisement
Extremely quiet (to see the following comparison of no load noise)
Makita 5037NB
Makita 5007NB
Compatitor A Model A
Competitor B Model No.B
Elbow for chip/sawdust extraction:
Excellent in exhaust performance,and you can
adjust the direction of exhaust and can connect
with Makita vacuum cleaners by hoses for dustless operation.
Air exhaust :
The cooling air guided
into blade case is exhausted
through this outlet,
however with being
separated from the sawdust.
Consequently, low noise
and excellent chi/sawdust
are assured.
Carbide-tipped
Saw Blade 185(16teeth)
Inch scale on Base
: 85dB
: 89dB(total noise of two 5037NB's = noise of one 5007B)
: 90dB(four 5037NB's = one Model A)
: 91dB(four 5037NB's = one Model B)
Scale on Rip fence (Guide rule)
Saw blade position
Line on the blade case to indicate the
blade position for precise following of cutting line.
Flat rear end of motor housing:
Saw blades can be replaced easily with
the machine standing on the motor
housing.
Powerful Max. Output,2,200W
14 Ampere motor
for smooth operation even
in heavy duty cutting.
0°-50° bevel cutting capacity:
2X4 lumbers can be cut at
50° bevel.
Lower cost for repairing:
Handle and motor housing are separated
and angular plate and depth guide are
fixed to base by screws.
So each part can be replaced respectively.
Depth setting lever:
You can adjust cutting depth
while gripping handle.
Advertisement
