Panasonic FP-7718 Service Manual page 43

4) Output check*
Activate the door switch before executing output check.
Press the Print key to start and press the Clear/Stop key to reset.
Code Item
34 Ozone/suction fan, and dust collecting fan When CN8-1 is +24V, ozone/suction fan rotates.
(FP-7728/7735) developer unit cooling fan When CN8-2 is +24V, dust collecting
(except FP-7718)
35 Recycling solenoid (FP-7728/7735)
40 Optics fan motor 2 (except FP-7718)
Exhaust fan motor 3 (except FP-7718)
Lift motor (FP-7718)
41 Paper feed solenoid (FP-7718)
44 Exit switch solenoid
(FP-7722/7728/7735)
Paper feed clutch (FP-7718)
46 Lift motor 1 (except FP-7718)
47 Paper feed clutch 1 (except FP-7718)
48 Paper feed solenoid 1 (except FP-7718)
49 Lift motor 2 (except FP-7718)
50 Paper feed clutch 2 (except FP-7718)
51 Paper feed solenoid 2 (except FP-7718)
65 LCC paper feed solenoid
(except FP-7718/7722)
66 LCC paper feed tray lift (up)
(except FP-7718/7722)
67 LCC paper feed tray lift (down)
(except FP-7718/7722)
* Accessory check require the selected accessory to be ready (Cover closed, etc.)
Function
fan rotates.
When CN8-7 is +24V, developer cooling fan rotates.
When CN7-11 is +24V, solenoid operates.
When CN107-3 is +24V, fan motor 2 rotates.
When CN107-5 is +24V, fan motor 3 rotates.
When CN109-2 is +24V, lift motor rotates.
When CN111-10 is +24V, solenoid operates.
When CN116-2 is +24V, solenoid/clutch operates.
When CN603-1 is +24V, motor rotates,
lifting up (together with upper limit control.)
When CN610-3 is +24V, clutch operates.
When CN610-4 is +24V, solenoid operates.
When CN604-1 is +24V, motor rotates,
lifting up (together with upper limit control.)
When CN609-3 is +24V, clutch operates.
When CN609-4 is +24V, solenoid operates.
When CN564-2 is +24V, solenoid operates.
When CN563-1 is +24V, motor rotates,
lifting up (together with upper limit control.)
When CN563-2 is +24V, motor rotates,
dropping down (together with upper limit control.)
5-9