Name Of Parts; Control Panel - Sanyo TIC-C300E Instruction Manual

Name of Parts

Main body
Power coard
Top plate

Control panel

Control panel
This plug is not waterproof – keep dry
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the
plug. Should the fuse need to be replaced, an ASTA approved BS1362 fuse must be used of the same rating, marked
thus.
If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure
it is the same colour as that visible on the pin face of the plug.
Fuse covers are available from Sanyo Service Centre.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed*.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING: A plug with bared flexible cords is hazardous if engaged in a live socket outlet.
5
There are some cases that the configuration
of power plug is different from this picture.
POWER LEVEL lamps
1 2 3 4 5 6
POWER LEVEL keys
Power plug
Air outlet
Cabinet
Air filter (Air inlet)
ON lamp
7 8 9 10
ON/OFF key