Care And Cleaning; Specifications - Sanyo TIC-C300E Instruction Manual

Care and Cleaning

Always clean the cooktop after each use.
Be sure to unplug the cooktop before cleaning.
This appliance shall not be cleaned with a water jet.
Do not immerse the cooktop in water or detergent. It may cause accidents, malfunction or breakdown.
Do not use any of following items for cleaning. They will cause colour change or deterioration on the control panel.
• Benzine, Thinner, Gasoline, Bleaching agent, Acids
• Polishing powder, Cleanser ( can be used for the top plate )
• Scrubbing brushes, Metal scrubbing brushes
Top Plate
With a firmly wrung out damp cloth, wipe off the cooktop. When grime is particularly severe, after rubbing with a soft liquid
cleanser, be sure to wipe off thoroughly with a firmly wrung out damp cloth.
Control panel
Wipe off with a firmly wrung out damp cloth. When grime is particularly severe, wipe area with a cloth which has first been
dipped in a solution of liquid kitchen detergent and water , and then firmly wrung out. Remove all detergent with a clean,
damp cloth. Be sure that water or detergent does not get into open crevices of control panel.
Dust in air inlet or outlet
Remove with a cloth or the dusting brush attachment of a vacuum cleaner.
Clean the removable air filter regularly. (at least once a week)
Do not operate cooktop without air filter in position.

Specifications

Model
Power source
Power consumption
Power adjustment range (Approx.)
Dimensions (Approx.)
Weight (Approx.)
Length of power cord
Protection functions
TIC-C300E
AC 230 V, 50 Hz
2900 W
200 W – 2900 W, 10 levels
400 mm (W) × 490 mm (D) × 130 mm (H)
Load detection ( Prevents heating small items. The cooktop does not operate
without a pot or pan load.)
Abnormal heating prevention function. Circuit fuse 20A.
TIC-C220E
2200 W
200W – 2200W, 10 levels
10 Kg
2 m
10