LG LY340C-SA Installation Manual page 9

(6) Power Management
The Power Management feature will turn off the television receiver if no input control command is received
from either the Local or IR Key within a selected hours.
y Activity on either of these inputs shall restart the 'Power Management' timer and check key time interval
again.
y This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y Default value is 'Off(disabled)'.
y TV should off and on after apply this setting.
(7) DTV Channel Update
It is a mode to set whether to update DTV channel information automatically or not.
y When DTV Channel Update is set to 'Auto', the function to update TV's channel map according to DTV
channel's stream information
y DTV Channel Update is set to 'Manual', the function to keep TV's channel map even though DTV
channel's information is changed.
(8) Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or Stand-
by status.
(8-1) Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y It is turned on by the Last Memory Input if the Input source is turned off.
y It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the RF.
y The available Input Source values should be rotated.
y If both the Input source and the 'On Time' menu are set, the Input source takes the priority.
y When the Input source is changed to the TV, Channel menu is available.
y When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map
structure does not support this, it depends on model's channel handling.
y Access to an input source item and a channel in 'On Timer' menu must be disabled when Power
On Default is activated.
(8-2) Tune Mode
Tune the selected start channel with physical or virtual method. Usually, digital channel uses virtual
channel and analog channel uses physical channel.
(8-3) Major
Select major part of start channel number if Input source value is TV. (in case of ATV, it means physical
channel number.)
(8-4) Minor
Select minor part of start channel number if Input source value is TV.
9