Sony KV-G14K3 Service Manual page 15

•
The respective dot positions resulting from moving each magnet
interact, so be sure to perform adjustment while tracking.
Use the V. STAT magnet to adjust the red, green, and blue dots
so they coincide at the center of screen (by moving the dots in
the horizontal direction).
(2) Dynamic Convergence Adjustment
Preparations :
•
Before starting this adjustment, adjust the horizontal static
convergence and the vertical static convergence.
1. Slightly loosen the deflection yoke screws.
2. Remove the deflection yoke spacer.
R
R
G
B
G B B G R
B
G
R
3. Move the deflection yoke as shown in the figure below and
optimize the convergence.
4. Tighten the deflection yoke screws.
5. Install the deflection yoke spacer.
B
B G R
G
R G B
R
B G
R
R B
G
G
B G R
B
– 15 –
KV-G14K3/G21K3
Purity
BMC (Hexapole)
V.STAT
R R G B
RM-870