Sony WALKMAN MZ-G750PC Operating Instructions Manual page 30

2
Press CMENUI,repeatedly until "SYNC REC" flashes in the
display,
and
then press ENTER.
SY'NC indicator
"SYNC" does not appear if optical cable is not connected to the
recorder.
3
Press -MENU+ repeatedly until "SYNC ON" flashes in the
display, and then press ENTER.
4
Press and slide REC to the right.
The recorder stands by for recording.
5
Play the source sound.
The recorder starts recording when it receives the playing
sound.
To stop recording, press
n
.
.*'a.
c
l
You cannot pause manually during synchro-recording.
l
When there is no sound from the player for more than 3 seconds during
synchro-recording, the recorder goes into the standby mode automatically.
When the sound comes from the player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby mode for 5 minutes or longer,
the recorder stops automatically.
l
For longer recording, follow step I of "Recording for long times" (page 28)
to select the recording mode, and then do the procedure of synchro-
wording.
Notes
l
Do not change the "SYNC REC" setting while recording. Recording may not
be done properly.
l
Even when there is no recorded sound on the sound source, there may he
cases when recording does not pause automatically during synchro-recording
due to the noise level emitted from the sound source.
l
If a silent portion is encountered for 2 seconds or more during synchro-
recording from a sound source other than a CD or an MD, a new track mark
is automatically added at the point whcrc the silent portion end%.
30