Recording With Analog Input (Line Cable Required) - Sony WALKMAN MZ-G750PC Operating Instructions Manual

Recording with analog input (line cable
required)
The sound will sent from the connected equipment as analog signal
but will be recorded digitally on the disc.
* Use the connecting cords without an attenuator. To connect
to a portable CD player having a stereo mini-jack, use the
RK-G136 connecting cord (not supplied).
g
Press and slide REC to the right.
REC indication lights up in the display and recording starts.
2
Play the source you want to record.
For recording operations, see "Recording an MD right away!"
(page 15). To record from a portable CD player, set the CD
player to pause and then start recording.
LINE IN (OPTICAL) jack is for both digita/ and analog input
The recorder automatically recognizes the type of line cable and switches to
digital or analog input.
Note
If you temporarily stop a recording operation by pressing 11, a track mark will
be added at that point when you press 11 again to resume recording. The
recording continues from on a new track.
27