CC Systems CC Pilot XS Basic User Manual And Reference Handbook page 39

User Manual and Reference Handbook for the CC Pilot™ XS
When the dialogue Get Connected is shown, the following steps must be carried out so
that a connection can be established with the CC Pilot™ XS:
Ensure that the CC Pilot™ XS is connected via a null modem cable to a
PC.
Start the CC Pilot™ XS (if it is not already started)
Start the program repllog on the CC Pilot™ XS. This is done via the Start
menu. Click on Run and type repllog in the window shown and then press
OK.
Now press Next in the Get Connected window on the PC. It is important
that not too long of time has passed after you pressed OK on the CC
Pilot™ XS in the previous step until you press Next in this stage. If
possible, it is recommended that that these buttons are pressed
simultaneously.
If the CC Pilot™ XS connects with the PC, there will appear a question on
the PC about establishing a partnership. Follow the directions on the
screen to establish a partnership.
To use the faster network connection, type repllog /remote in the Run window and
chose Ethernet in ActiveSync on the PC.
Transfer of Files between the PC and CC Pilot™ XS
When a connection is established between the PC and the CC Pilot™ XS, files can
easily be transfer between them. Start the Explorer file browser on the PC and select
Mobile Device to access the file system on the CC Pilot™ XS.
39