Connecting A Monitor; Initializing (Turning On) Your Dvr - TALOS DVR Quick Reference Manual

•
•
Connect a TV
•
here using a
BNC to RCA
adaptor
Connect camera
video here
• When the DVR is first initialized you will need to format the hard drive by clicking on the
"Yes" tab
• The DVR will display a message on the monitor when hard drive format is complete
• The DVR will beep to inform you that no cameras are connected

Connecting a Monitor

You will need a monitor or TV to set up the DVR for use
Connect a monitor to the DVR using the HD15 female output
Or connect the DVR to the composite video input on a TV
– You will need a BNC video cable with a BNC to RCA adapter, available from
Parts-Express
Connect a monitor here
using a VGA Cable
Turning On DVR
Cat 5 connection Connect the
for networking mouse here
Power
USB thumb
drive
5