Configuring Your Dvr For Local Computer Access - TALOS DVR Quick Reference Manual

• Open "Main Menu" on the DVR, enter your password, click "Confirm" then select "System Setup" then "Network"
•When connected to a router the DVR will automatically negotiate an IP address.
•So you can find your DVR later, we recommend you assign it an IP address on your network. Simply enter a new
number into the last three digits of the IP address and note that address.
•Note: To limit potential conflicts with other devices on your network, enter an address higher than what may be
assigned by DHCP. Eg.192.168.1.222 or 192.168.0.222
You can check your router's IP address by :
Windows XP
-Click "Start" on your computer's taskbar
-Click "Run", type cmd then click "OK"
Windows 7
-Click "Start" then "Select All Programs"
-Click "Accessories" then "Command Prompt"
Configure DVR to access video on local computer
Type ipconfig/all
Look for Default Gateway
12