Advertisement
Advertisement
Table of Contents
Related Manuals for Vienna Acoustics SUBSON
Summary of Contents for Vienna Acoustics SUBSON
- Page 1 SUBSON...
- Page 2 WARNING SHOCK HAZARD. DO NOT OPEN. TO AVOID THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE BASS DRIVER, OR THE AMPLIFIER ON THE BOTTOM SIDE OF SUBSON. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE CORRECT TYPE OF FUSE (1 ADDITIONAL FUSE FOR REPLACEMENT IS INCLUDED).
- Page 3 If you choose a position on the wall or on a shelf for SUBSON, the subwoofer must be firmly secured into position. Otherwise the subwoofer could fall down because of vibrations causing it to move, or “walk.”...
- Page 4 13. LIGHTNING STORMS. Unplug SUBSON during lightning storms or when unused for long periods of time. 14. CLEANING. The product should be cleaned only as recommended later in this instruction manual. 15. RETAIN INSTRUCTIONS. Retain the safety and operating instructions for future reference.
- Page 5 1. To avoid fingerprints on the aluminium, please put on the enclosed gloves when positioning SUBSON. 2. Connect SUBSON to your signal source by using the chinch or RCA phono cables. Alternatively, the SPEAKER LEVEL IN inputs can be used for signal connection. Using speaker wire, simply connect to the subwoofer from the main speaker output terminals of the main system amplifier.
- Page 6 PHASE switch. Leave the PHASE switch in the position that achieves clearly louder bass output. 7. If SUBSON is not loud enough, it is possible that your main loudspeakers do not supply enough mid-bass. In that case the crossover frequency point (LOW PASS knob) may need to adjusted to the highest frequency (90 Hz), in order to achieve maximum mid-bass output from the subwoofer.
- Page 7 Should spots or stains appear, clear water can be used to gently remove them. Should the bass driver become dusty, it is safe to use a soft brush or cloth to clean the woofer. Happy Listening! Your Vienna Acoustics Team...
Need help?
Do you have a question about the SUBSON and is the answer not in the manual?
Questions and answers