Service Searching; Tuner Configuration - UNIBOX HD1 User Manual

61 System Configuration

5.2-2. Service Searching

How to use > Press
Here you setup the tuners of your UNIBOX HD1 and run channel scanning automatically or
manually.

Tuner Configuration

How to use > Press
If you run the First Time Installation process (refer to the "3. First Time Installation"), the Tuner A
is already configured. You can check the information of Tuner A and which satellites are scanned
by Tuner A as follows.
 'Setup'  'Service Searching'
 'Setup'  'Service Searching'  'Tuner Configuration'