Table of Contents
Advertisement
Headlights
The rotating switch on the left lever
controls the lights. Turning this
switch to the first position "
turns on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the second
position "
" turns on the
headlights.
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder beeper when you open the
driver's door.
"
To change between low beams and
high beams, pull back on the turn
signal lever until you hear a click,
then let go. The blue high beam
indicator will light (see page 36).
Controls Near the Steering Wheel
To flash the high beams, pull back
and hold the turn signal lever.
Release the lever and the high
beams will go off.
The high beams will stay on for as
long as you hold the lever, no matter
what position the headlight switch is
in.
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
off, even if you set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Instruments and Controls
Hide quick links:
Advertisement
Table of Contents
