Toshiba 15VL56B Service Manual page 31

5) Set all the settings on the Connection Settings window to those in the table below. Check
all the settings, and then click [OK].
6) Click [ ] on the Genesis ISP Utility window to load necessary "hex" data fi le.
7) Check that the necessary "hex" data fi le name is displayed in Flash Image on the Genesis
ISP Utility window. Setup of the SCALER fi rmware upgrading is completed.
Item
Port
Baud Rate
Datat Bits
Parity
Stop Bits
Read Interva
Read Multiplier
Read Constant
Write Multiplier
Write Constant
Scheme
Click [OK]
Click [ ] to load necessary "hex" data fi le.
Click [OPEN] to load necessary "hex" data fi le.
Check that the "hex" data fi le has been loaded
- 31 -
Setting
COM1
115200
8
None
1
0
0
0
0
0
Default Serial Profi le