Table of Contents
Advertisement
00GB03Tune.fm Page 24 Wednesday, June 12, 2013 1:34 PM
SETTING UP YOUR TV
Standby Channel Update
If the Standby Channel Update is set to On, when the TV
is in Standby, Digital Tuning is automatically executed.
a
Select DTV Settings from the Installation menu
and press OK.
b
b
Press
to select Standby Channel Update and
c
B
b
press
and
/
to select On.
Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
using the television for displaying in a shop, etc.
a
Select Location from the Installation menu.
b
c
B
b
Press
and
/
to select Home or Store.
Analogue switch-off
This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new digital
services.
This 'switch-off' will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is re-
tuned to ensure that existing and new digital services can
be viewed without disruption.
24
Advertisement
Table of Contents
