Pioneer FH-P6050UB Installation Manual page 2

5cm
10cm
1.This product
2.Front output
3.AUX jack (3.5 ø)
6.Rear output or
Subwoofer output
Use a stereo mini
plug cable to connect
7.Antenna jack
with auxiliary device.
5.Fuse (10 A)
8.IP-BUS input (Blue)
10.Multi-CD player
(sold separately) 9.IP-BUS cable
4.USB cable
Connect to separately sold USB device.
11.Yellow/black
If you use an equipment with Mute function, wire this
1.5 m
lead to the Audio Mute lead on that equipment. If
not, keep the Audio Mute lead free of any
connections.
12.Yellow
Connect to the constant 12 V supply terminal.
13.Red
Connect to terminal controlled by ignition switch (12 V DC).
14.Orange/white
Connect to lighting switch terminal.
28.With a 2 speaker system, do not
15.Black (chassis ground)
connect anything to the speaker leads
Connect to a clean, paint-free metal location. that are not connected to speakers.
16.White 18.Gray
20.Front speaker
17.White/black 19.Gray/black
21.Left
23.Green 25.Violet
27.Rear speaker
24.Green/black 26.Violet/black
31.Connect with RCA cables
(sold separately)
29.To front output
30.To Rear output or
Subwoofer output
33. System remote control
34. Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
35.Perform these connections
when using the optional
amplifier.
36.Rear speaker or
Subwoofer
20.Front speaker
20.Front speaker
22.Right
27.Rear speaker
32.Power amp
(sold separately)
32.Power amp
(sold separately)
36.Rear speaker or
Subwoofer
20.Front speaker
Fig. 1