1. Manuals
  2. Brands
  3. Infinova Manuals
  4. DVR
  5. V3061 Series
  6. Installation & operation instructions

Infinova V3061 Series Installation & Operation Instructions

Embedded network digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V3061 Series
Embedded Network Digital Video Recorder
Installation/Operation Instructions
This manual is applicable for the installation and operation of Infinova V3061 series Embedded
Network Digital Video Recorders.
V3061 series DVR employs high performance power PC hardware structure, embedded Linux system
and dual 1000M network port design to provide an excellent digital product for surveillance industry.
This series DVR supports up to 16-ch video recording at D1 resolution, which can meet the demand of
any surveillance system.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V3061 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Infinova V3061 Series

Summary of Contents for Infinova V3061 Series

  • Page 1 V3061 Series Embedded Network Digital Video Recorder Installation/Operation Instructions This manual is applicable for the installation and operation of Infinova V3061 series Embedded Network Digital Video Recorders. V3061 series DVR employs high performance power PC hardware structure, embedded Linux system and dual 1000M network port design to provide an excellent digital product for surveillance industry.

  • Page 3: Copyright Statement

    This device must accept any interference received, including interference that may cause undesired operation. V3061 series Network Digital Video Recorders have been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.

  • Page 4: Important Safety Instructions And Warnings

    Warning: To avoid risk of fire and electric shock, keep indoor products away from rain and moisture! Related Documentations <V3082 Series Client Software for Embedded DVR Manual> <V3061 Series Embedded DVR Quick Operation Guide> <V3061 Series Embedded DVR Quick Installation Manual>...
  • Page 5 Change the damaged harddisk to insure the integrality of the record data(The information of the harddisk error is in the log) It's better to use the recommended HDDs only. Please visit below link for the list of the HDDs recommended by Infinova:...

  • Page 7: Table Of Contents

    Table of Contents 4.4.1 PTZ parameters setting..........16 Chapter 1 System Overview............1 1.1 Product Description...............1 4.4.2 PTZ direction control ..........16 1.2 Front Panel Introduction............2 4.4.3 Set and call preset............16 1.3 Remote Controller Introduction ..........4 4.4.4 Set and call pattern ............16 4.5 Alarm ..................

  • Page 9: Chapter 1 System Overview

    Support video loss, motion detection and video mask alarm y Provide various abnormity hand modes, support hard disk full, V3061 series DVR can not only work independently in a local site, but also build a powerful security surveillance network. This series...

  • Page 10: Front Panel Introduction

    1.2 Front Panel Introduction Figure 1-1 Front panel Name Type Description Status Channel 1-16 status indication, "Green" indicates recording is ongoing, "red" indicates net 1-16 indicator transfer is ongoing, "orange" indicates both recording and net transfer are ongoing (1) Input message, including numerals, capital & small English letters and symbols etc. Number key (2) Switch channel in preview and PTZ control status.
  • Page 11 (1) Switch input methods (numeral, letter and symbol) Control key (2) Reduce focus in PTZ control status (3) Set the full screen as setting area in "Mask/Video mask alarm/Motion detection" setting (1) Switch among multiple-screen display modes in preview interface Control key (2) Increase focus in PTZ control status (3) Clear all setting area in "Mask/Video mask alarm/Motion detection"...

  • Page 12: Remote Controller Introduction

    1.3 Remote Controller Introduction Name Full Name Type Description Power Switch Control key Power switch of DVR (Press at least 3 seconds when turn off DVR) Select DVR to be controlled. Use method: DEV key>Device No.> Device Control key ENTER key Number Key Input key The function is the same with the number keys in front panel...
  • Page 13 IRIS Iris Control key Open/Close iris in PTZ control FOCUS Focus Control key Increase/Decrease focus in PTZ control Function key The function is the same with F1 key in front panel (1) Switch between preview interface and recording management Video Record Function key interface (2) Call up presets in PTZ control, same as...

  • Page 14: Chapter 2 Installation And Connection

    Chapter 2 Installation and Connection Reference: Formula to calculate total capacity needed for DVR Note: Make sure the power supply cable is disconnected before Calculate total capacity needed by each DVR according to video connecting DVR with other device. recording (video recording type and video file storage time). Calculate formula: 2.1 Counter-check Device and Accessories Step: Calculate the capacity...

  • Page 15: Rear Panel Introduction

    2.3 Rear Panel Introduction Figure 2-1 Rear Panel Item Description Standard BNC connectors to connect with analog video device for 16-ch analog video VIDEO IN inputs. Standard BNC connectors to connect with monitor, matrix and other devices for 16-ch LOOPING analog video looping output.

  • Page 16: Alarm Input/Output Connection Method Introduction

    2.4 Alarm Input/output Connection Introduction DVR Alarm Output Port AC Load 1. Alarm input interface introduction Indicator ALARMS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Figure 2-2 Alarm input interface J901 G (GND): 2 "Alarm Input"...

  • Page 17: Ethernet Connection Cable Making Method

    2.5 Ethernet Connection Cable Preparation 2.6 RS-232 Connection Cable Preparation 1. Material and tool 1. Material and tool A twist cable (8 cores, length depends on the actual demand, but One twisted cable (8 cores), one standard RJ45 connector, one or less than 100m), 2 standard RJ45 connectors, 1 special tool for more DB25 or DB9 plug, a special tool for RJ45, one soldering iron, RJ45.

  • Page 18: Install Writer

    the following situations and parallelism of pins. (4) When the RJ45 serial port of the DVR is connected with the device with DB9 male type connector, the pin parallelism as follows: DB9 Male Type Serial Port Connection Cable Device RJ45 DB9(Female) DB9(Male) TXD 4...

  • Page 19: Chapter 3 System Menu Introduction

    This manual mainly focus on the introducing the operation via front panel. 3.1 Menu Operation V3061 series DVR has three levels of menu. The first level of menu is shown in Figure 3-1. Figure 3-3 Every menu has many operations, below section will have detailed introduction on operation of common use control and input method.

  • Page 20: List Box

    3.1.3 List Box "Unselect All": Cancel the selection of the options in current menu. "Search": Search the content match with the setting. When there're 2 or more than 2 options, but only 1 option can be "Refresh list": Refresh the data in the list. selected, first press ENT to call out the list box, then select the "Play": Play the file selected in the current menu.

  • Page 21: Menu Structure

    Motion Area Detection Schedule Week, Time Recording, PTZ control, Audible Figure 3-10 Warning, Linkage Control Center, Alarm Preview and 4 Alarm Outputs Copy to Figure 3-11 Monitor, Open/Close video preview, Preview Switching Time, Open/Close Preview Note: Alarm Preview, Alarm Preview Switching (1) Some editing boxes allow number input only.

  • Page 22: Chapter 4 Main Functions Introduction

    NIC, NIC Type and MAC Chapter 4 Main Functions Introduction Address, IP Type, IP Address, Subnet Mask, 4.1 Turn on DVR Gateway, Auto DNS and General DNS Server, default Settings gateway Note: The DVR supports 100V-240V self-adaptive power supply. Network Before powering on, please confirm the AC voltage matches with Start IP, mask Routing list...

  • Page 23: User Authority

    4.3 Preview as "12345678", and the default langue is English. The DVR's menu divides to parts follows: The operating steps as follows: (1) Preview Step: Press ENT key to drop down user name list, move the (2) Manual recording: press REC key to turn on the recording cursor to select the desired user name, and press ENT key.

  • Page 24: Ptz Parameters Setting

    2 , then the preset 002 is called up. For example, the address of the dome camera is 3, baud rate is 2400 and Infinova protocol, the setting of DVR must be same. 4.4.4 Set and Call up Pattern Press "Save" after finishing setting, the setting will take effect 1.

  • Page 25: Alarm

    For example, for the domes to confirm. After press ENT key , the next box will pop up or pan/tilt cameras with Infinova protocol, the pattern 1 ~ 4 could automatically, press ESC key to exit and save the setting.
  • Page 26 (5) Copy and save Refer to "(5) Save" of "Video mask alarm" in section 4.5.1. 3. Motion detection alarm Select channel Refer to "(1) Select channel" of "Video loss alarm" in section 4.5.1. (2) Select the video motion detection check box Move the cursor to the check box of "Video motion detection", and press ENT key.

  • Page 27: Alarm Input

    Press "Save" to save the parameter setting, and "Exit" to return to alarm" in section 4.5.1 for the setting of "audible warning", "control "Channel" interface. center" and "Trigger alarm output". (7) Copy and save 3. Copy and save Refer to "(5) Save" of "Video mask alarm" in section 4.5.1. After finishing setting, move the cursor to "Copy", and press ENT key to copy the current parameter setting temporarily, then 4.5.2 Alarm Input...

  • Page 28: Recording

    4.7 Recording alarm recording. (2) It's not necessary to restart the manual recording if reboot the 4.7.1 Manual Recording DVR. Note: User must have the recording authority. Make sure hard disks are installed before recording. 4.7.2 Scheduled Recording 1. Enter manual recording From the main menu "Record"...

  • Page 29: Alarm Recording

    recording" in section 4.7.2. 4. Set recording video parameters Based on the demand, user should set the stream type, IP rate, 5. Confirm and save Refer to "5 Confirm and save" of "Scheduled recording" in section frame rate, resolution, video quality, bit rate type and max bit rate properly.
  • Page 30 Figure 4-16 Figure 4-18 3. Playback recording file Note: (1) The unit of play process is "%"; The DVR supports single file and several files playback. Fast and (2) "Speed: X" indicates the playback speed. It's 1X for slow play operations are available in playback. normal play.

  • Page 31: Power Off

    Figure 4-19 Figure 4-20 Press "Backup", the system starts to create buffer storage file, and Enter the selected directory by double-click mouse on the directory write to the CD/DVD once finishing. Press to erase the data in or move the cursor to the directory and press ENT key.

  • Page 32: Chapter 5 Other Settings

    Press ENT key, a prompt box "Are you sure to shut down now?" Chapter 5 Other Settings will appear, as shown in Figure 4-22. 5.1 Preview Settings In the preview interface, press MENU key to enter the interface as shown in Figure 5-1. Select "Preview" and press ENT key to enter preview settings interface, as shown in Figure 5-2.

  • Page 33: Network Settings

    (3) Video preview switch time General settings It has 8 options, never, 5s, 10s, 20s, 30s, 1m, 2m and 5m. The The general settings include 11 settings, as follows: operation is the same with monitor. (4) Alarm preview NIC type It has two options, On and Off, the operation is the same with IP type monitor.

  • Page 34: Serial Port Settings

    Advanced settings The advanced settings include 6 options, as follows: Default port HTTP port Alarm center NAS IP NAS path The introduction of each option as follows (1) Default port The default value is 5000. (2) HTTP port This parameter is not settable, the default value is 80. (3) Alarm center This setting is to set the IP address of alarm center.

  • Page 35: User Management

    Figure 5-8 The settings include 5 options, as follows: Figure 5-9 Baud rate Data bits User management includes view user information, modify user Stop bits privilege, add user, edit user and delete user. These operations need Parity related operating authority. In the user management interface, the Flow control information of users, user type, user privilege, add user, edit user and delete user is displayed in a list box.

  • Page 36: System Settings

    "V2117 keyboard operation manual" for the operation of keyboard. 2. Device name The device name supports 1 to 20 characters string. The default name is "Infinova DVR". 3. Language The system supports two languages, Chinese and English. 4. Video mode 2 video formats are optional, PAL and NTSC.

  • Page 37: Time Settings

    5.5.2 Time Settings There're two ways to search log, type and time. In the preview mode, press MENU key to enter the interface as Set the search criteria, for example, major type, minor type, and shown in Figure 5-1. Select "System" and press ENT key to enter time.

  • Page 38: Advanced Settings

    shown in Figure 5-1. Select "System" and press ENT key or number key 9 to enter the setting interface, and press WIDE key to switch to "Backup" option, as shown in Figure 5-17. Figure 5-18 1. Upgrade mode: The way to upgrade the system. The system Figure 5-17 supports USB mode only.

  • Page 39: Bi-Directional Audio Talk-Back

    enter interface as shown in Figure 5-1. Select "Channel" and press to return the volume control dialog box in the following figure: ENT key or just press 1 key when at Figure 5-1 to enter the channel setting interface, as shown in Figure 5-19. Users can make basic settings of selected channels, including privacy mask, contrast ratio, brightness, hue, saturation, channel name and OSD information.
  • Page 40 Infinova 51 Stouts Lane, Monmouth Junction, NJ 08852, U.S.A. Tel: 1-888-685-2002 (USA only) 1-732-355-9100 Fax: 1-732-355-9101 sales@infinova.com V1.2 1209...

Table of Contents