DESCRIPTION The 204 series is entirely made in AISI316L stainless steel, for use in industrial and marine environments and in general where a corrosive atmosphere can cause a rapid deterioration of a standard aluminium-steel housing. MODELS 204-110 Camera housing (L=500 mm). UFW: 110 mm 204SH110 Camera housing (L=500 mm) with sunshield and heater.
Page 3
1. Open the housing Unscrew the four screws on the rear flange and remove it. Screws Be careful not to lose screws, washers and O-rings. 2. Prepare the housing to install the camera, sliding the upper rail away from the lower rail. Upper rail Lower rail 3.
Page 4
TECNOVIDEO S.r.l. Via San L. Murialdo, 8 36030 Villaverla (VI) ITALY Tel.