Sony ST-SA50ES Operating Instructions Manual page 9

Storing stations
This section shows you how to store up to 40 of your
favorite FM or AM stations manually onto two-character
preset codes made up of a character (A, B, C, or D) and
a number (1-0), such as A7. You can store up to 10
stations on each of the 4 different letters. You can use
these letters to classify stations according to music
category or station band.
1
Tune in the FM or AM station you wish to store.
2
Press MEMORY.
"MEMORY" appears along with the lowest
vacant code to indicate that the tuner is ready to
store the station.
3
Press SHIFT to chose either A, B, C or D.
The letter you choose appears in the display.
4
Press a number button (1-0).
The tuner stores the station at the preset code you
specified and the corresponding indicator lights
on the preset calendar.
5
Repeat steps 1 through 4 to store other stations.
z
If you want to label the stations
Follow the procedure described in "Naming Preset
Stations" on page 11.
Erasing preset stations
You can erase preset stations one by one.
1
Press MENU.
2
Turn TUNING/SELECT so that "Edit" appears in
the display and press ENTER.
3
Turn TUNING/SELECT so that "Erase" appears
in the display and press ENTER.
4
Turn TUNING/SELECT so that the preset you
want to erase appears in the display.
5
Press ENTER.
The station is cleared from the preset memory.
The respective indicator on the preset calendar
goes out.
z
If you want to erase all the preset stations
1 Turn off the power
2 While holding down the number 5 button and
MENU, press U to turn on the power.
Getting Started
9