Advertisement
Quick Links
Advertisement
Summary of Contents for SENAO Power Amplifier
- Page 1 User’s Manual of Power Amplifier...
-
Page 2: System Configuration
System Configuration NOTE: For outdoor installation, you may need plastic tubes. Insert the N-Type cable into the plastic tube then assemble with the N-Type connector. Move the plastic tubes to the junction of the connector and the cable, and then heat it up to contract the plastic tubes. -
Page 3: Power Amplifier
Power Amplifier Mounting Flanges Antenna Connection Power/ Transmit LED Radio Connection Items Description Antenna Connection This port connects to the antenna Radio Connection This port connects to the DC Power Injector Mounting holes are provided for either mast mounting Mounting Flanges using the included U-bolts, or bolted directly to a bracket or other structure. - Page 4 DC-Injector, and flashes RED when the cable mismatching or voltage operates abnormal This LED glows GREEN in transmission mode when the Transmission LED power is sent to the power amplifier Connection to This port connects to the Radio device (ex: Wireless PC Radio...
-
Page 5: Lightning Protector
to Amplifier NOTE: Connection to Radio port MUST connect to the radio device (ex: Wireless PC Card) and RF and DC Power to Amplifier port MUST connects to the Power Amplifier. If connecting in OPPOSITE way, all of the devices will be DAMAGED. Lightning Protector Radio transmitters, receivers and RF cables require protection when attracted by lightning strike. -
Page 6: Mounting Instruction
Mounting Instruction This power amplifier can be mast mounted using the stainless steel U-bolts as shown in Figure 5 and Figure 6. Refer to the sketch for proper positioning. Carefully tighten the bolts using the included nuts. Take care not to over-tighten the bolts or cause damage to the RF connectors on the amplifier.