Advertisement
The Floor Care People
CAUTION:
Do not use the attachment before reading these and the appliance instruction manual
1: UPHOLSTERY TOOL
D0520
AYH 2042
A)
To attach the Upholstery tool , remove the Transfer Hose from its inlet in the Recovery Tank, and insert
one end of the 5M Hose into the now clear inlet. (1)
B)
Insert the other end of the Hose into the Upholstery Tool.(2)
C)
Attach one of the Coupling Plugs on the water hose to the Upholstery Tool (3) and the other end into the
Coupling Socket.(4)
D)
Rotate the black Selector Lever from Brush to Tool. (5)
E)
Plug Machine into mains supply, activate the Pump and Vacuum switches.
(DO NOT ACTIVATE BRUSH SWITCH).
F)
Squeeze the trigger mechanism on the Upholstery tool to start solution flow.
1
2: CARPET TOOL
VH6207
AYH 2042
D0110
A)
Attachment and activation is as above.
ROUTINE MAINTENANCE INFORMATION FOR USER
1.
If the Spray Jet ceases to spray solution, remove the nozzle by
twisting it from its housing, rinse under a tap to release dirt and
replace.
2.
Always clean all attachments after use.
3.
All relevant Safety Information from main machine booklet applies.
ISS 11-Apr 2005
WAND AND UPHOLSTERY TOOL OPERATORS GUIDE FOR USE WITH THE SX15
Used to clean Upholstery.
-
Upholstery Tool.
-
5M Hose Assembly.
2
For use on smaller or less access able carpeted areas.
-
Carpet Tool Assembly.
-
5M Hose Assembly
-
Hose Storage Bag.
3
AYK 1016
4
5
Spray Jet
Advertisement
