Samsung RF22 Series User Manual page 13

3. R e m o e v 4 h x e h a e d b
a socket wrench(10 mm).
Reassembling the fridge door
1. Insert and tighten the screw into the left and
right middle hinges with a philips screwdriver(+).
2.
Insert and tighten the 2 hex head bolts into the
left and right middle hinges with an allen
wrench(3/16").
3. Replace the middle hinge cap.
o s t l f o r m b o h t s d i s e w h t i
4. Place the hole in the bottom of the left d oor
over the middle hinge.
5. Position the top table in place. Insert and
tighten the 3 screws into the top table with a
philips screwdriver(+).
Top Table
6.
Insert the left upper hinge shaft into the hole on
the corner of the fridge door.
7. Insert the upper hinges into the holes at the top
of the door.
Insert and tighten the 3 hex head bolts into the
left and right upper hinges with a socket
wrench.
setting up _13