Moda flame MFE5035C Owner's Manual page 5

The wall mount fasteners included with this fireplace are for use ONLY with a
NOTICE
wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder
blocks, or other wall types, consult a professional for the best attachment methods.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock, fire, or personal injury.
AVOID INJURY and DAMAGE! Three screws should be screwed directly into wall
studs. If only two studs are available, two screws must be screwed directly into the
wall studs, and additional screws must also be screwed into the drywall anchors.
ALWAYS unplug this fireplace heater before assembly or cleaning, or before
relocating. Failure to do so could result in electric shock, fire, or personal injury.
STEP1 ) Select a location that is not prone to moisture and is located at least 36" away from
combustible
materials such as curtain drapes, furniture, bedding, paper, etc. then use a ￠2.75 drill to drill the
three holes A,B,C and use the Hammer to thread the Drywall anchors into the hole till it keep flat with
the wall.
5