Response To Power Recovery; Maintenance And Cleaning; Technical Data - HomeMatic HM-OU-CFM-PI Instruction Manual

11 Response to power recovery

When the operating voltage is switched on (recovery of mains
voltage), the actuator checks its components. The device LED
will flash if an error is detected during this check. This is repeated
continuously and the device does not perform its function. If the
test is completed without errors, the actuator transmits a wireless
telegram containing its status information. To prevent all actuators
from transmitting at the same time when power is recovered (after
a mains power failure or a disconnection, for example), there is a
random delay before the actuator transmits. During this time, the
device LED flashes (as in teach-in mode). If the delay is very short,
this flashing may be almost imperceptible.

12 Maintenance and cleaning

The product does not require any maintenance. Enlist the help of
an expert to carry out any repairs. In the event of an error, please
return the device to our service department.
22

13 Technical data

Transmit / receive frequency:
Open air range:
Power supply:
Standby consumption:
Volume (audible):
Ambient temperature:
Degree of protection:
Housing:
Housing colour:
Dimensions (H x W x D):
File formats supported:
Memory cards supported:
Instructions for disposal
Do not dispose of the device with regular domestic waste.
Electronic equipment must be disposed of at local collection
points for waste electronic equipment in compliance with the
Waste Electrical and Electronic Equipment Directive.
The CE Marking is simply an official symbol relating to the
free movement of a product; it does not warrant a product's
characteristics.
868.30 MHz
Up to 100 m
230 V / 50 Hz
0.5 W
105 dB
+5°C to +55°C
IP20
PBT
RAL 9010 pure white
with diffuse masking frame
125 x 63 x 40 mm
(not incl. plug)
MP3 (CBR, VBR, ABR)
microSD/SDHC, max. 255
titles
23