Advertisement
Manual
Projection Setup
Click [Projection Setup] button
♦
<Resolution>: SWXGA(1440*900), XGA(1024*768), WXGA(1280x800) and
SVGA(800*600). The default value is XGA.
♦
<Color Depth>: provide WPS output with 16bit or 32 bit color depth. It depends on
your PC settings.
♦
<Screen Refresh Rate>: This is VGA output refresh rate, provides 60 Hz and 75Hz
to suit for different kinds of projectors.
♦
<Login Code>: You can select "Disable", "Random", or "Use the following code" to
set a specified 4-characters Number.
♦
<Apply>：Confirmation and Save modifications
♦
<Cancel>: Cancel all the modifications
Change Passwords
Manual
English
Click [Change Password] button, to change password value.
The length of password is up to 8 characters.
♦
<Enter New Password>: enter new password you want to change for each category.
♦
<Confirm New Password>: double confirm new password.
♦
<Apply>: Confirmation and Save modifications.
Reset to Default
Click [Reset to Default] button to restore factory default settings.
<Apply>: Confirmation and action.
Firmware Upgrade
31
English
32
Advertisement
