Setting The Signal - Bosch WA SERIES Instruction Manual And Installation Instructions

Setting the signal

en
M
Setting the signal
i n g S e t t
1. Set the button and information signals
Set the programme selector to the "Off" position
and then turn the dial one position to the right.
2. Set the volume for button signals
The current signal volume now appears.
Press the button for the "Ready in" time
repeatedly until the required signal volume is
set.
3. Set the volume for the information signals
Turn the programme selector
one further position.
18
t h e
Press the button for the "Ready in"
time repeatedly until the required
information signal volume is
reached.
s i g n a l
Press the button for Eco Perfect ¦, hold it down
and, at the same time, turn the programme
selector one further position to the right.
Go to point 3 to set the vol-
ume for the information sig-
nals, or
Set the programme selector
to the "Off" position to exit the
menu.
Set the programme selector to the
"Off" position to exit the menu.