Playing The Radio; Smart Eq Function - AEG MMC 4418 DVB-T Instruction Manual

PLAYING THE RADIO

DOWN
Basic operations
1.Press CH+ or CH- button to find a station.
The frequency will change with each press.
When a station's signal is received, it will
appear in the display.
2.Pree PRE/ TUN Key to enter into tune state.
3.To lock onto a station quickly, hold the CH+
or CH- button for few seconds. The unit
will start automatic tuning in tune state.
When a station is found, automatic tuning
in tunstops.
4. To add a station to memory, press the MEMO
button. The memory storage number will
blink for four seconds in the display. Press
MEMO again to store the station.
Memory number
MHZ
FM\CH:
Wave band Station frequency
SOURCE FUNCTION TFT ON/OFF
1
4
7
0
RECALL
MEMO
PAUSE/STEP
VOL
+
ZOOM PROG
GOTO TITLE
SUBTITLE N/P
RESUME REPEAT
EPG TV/RADIO
UP
Automatic Tuning
This unit will store up to 30 individual
FM radio stations in its memory.
1.Press the AUTO button. the
automatic tuning mode is activated.
2.Stations will be stored in ascending order
until 30 stations of that particular wave band
have been saved. When a station is stored, the
memory storage number, as well as the station's
frequency, will flash for four seconds in the
display.
3.When the total number of stations reaches
30, in a particular wave's memory,
no further station in that wave band will be saved.
Press the TUNER button to select the desired wave band.
1.To play preset stations
2.Press the PRE/ TUN button.
3.Press any of the numbered buttons to
select the desired station's memory number.
For example, to play the station at memory
#5, simply press the 5 button; for memory
#17, press the 1 button followed by the 7
button.
4.Stations in the memory function may also
be accessed by pressing the CH- or CH+
button.
-17-
STANDBY
MUTE
2 3
5 6
8 9
SETUP
+10
PRE/TUN
ENTER
AUTO
PLAY STOP
CH
+
SLOW A-B
MENU RETURN
LANGUAGE ANGLE
R/L 4:3/16:9
VIDEO EQ
Note: Pressing arrow bottons repeatedly it is possible to select the filter icon
(AUDIO/Video/Picture), once selected the desired icon press enter to coufirh.
The unit will show only the files which belong to the selected category..
PLAYING MUSIC FILES AND JPEG
Current MUSIC/JPEG file
name. If a JPEG file
playing, the na m e should be
*.jpg.
The playing file is
a JPEG picture.
The playing file is
a music file.. File Switch Region: Displays the
file type of the playing and the
switching.

SMART EQ FUNCTION

Press the EQ key on the remote control to select smart EQ function:
NORMAL CLASSIC JAZZ ROCK POP.
NOTICE:The function is only in playing VCD CD
Music file or in FM mode.
-18-
60 150 400 1K 3K 7K 16K