Installing or replacing the micro SIM card
Before you start, print these instructions. Read the important safety information first. See "Important
safety information" on page vi.
Micro SIM card is a small plastic card with an Integrated Circuit (IC) chip mounted on one side of the card.
If your computer supports wireless-WAN connections, your computer might require a micro SIM card to
establish wireless-WAN connections. Some computer models might be shipped with a micro SIM card,
either installed in the computer or as part of the shipping contents. If your computer does not come with a
micro SIM card, you can purchase one from the local service provider.
To install or replace the micro SIM card, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 121.
2. Locate the micro-SIM-card tray at the right side of the computer.
3. Insert a straightened paper clip into the hole in the micro-SIM-card tray
ejects. Then, slide the micro-SIM-card tray out of the computer
4. To install a micro SIM card, go to step 5. If you are replacing a micro SIM card, gently take the old
micro SIM card out of the tray.
122
User Guide
1
. The micro-SIM-card tray
2
.