Table of Contents
Advertisement
In the third seam section
sewing should be carried out with an actual length of 190 mm and a required length of
160 mm.
● Cal up the menu for entering the required/actual length of the seam section and enter the
values for the required and the actual length.
● Conclude the input of the required/actual length.
● Change to the input of the fourth section.
In the fourth seam section
-
sewing should be carried out without fullness,
-
the end of the seam section should be carried out with the pedal function
-
the "thread trimming" and "sewing foot raised" functions should be activated.
● Enter the value "0" for the fullness.
● Call up the menu for the input of the end of the seam section.
● Switch to the next seam section with the pedal function.
● Switch on the "thread trimming" function.
● Switch on the "sewing foot raised" function.
● Conclude the input.
● Activate the "end of program" function.
● Conclude the seam program input and change to programmed sewing
Input
11 - 12
Advertisement
Table of Contents
