Lanier GX3000 User Manual page 222

Monitoring and Configuring the Printer
5 : Configure SNMP
6 : Configure SMTP
7 : Configure SMTP (Group 1)
8 : Configure SMTP (Group 2)
9 : Configure SMTP (Group 3)
10 : Configure SMTP (Group 4)
96 : Display Status
97 : Reset Settings to Defaults
98 : Restart Print Server
99 : Exit
Configure General
Settings
Change root Password
LAN Interface
Configure TCP/IP
Settings
DHCP/BOOTP
RARP
IP Address
Subnet Mask
Default Gateway
Host Name
Use DHCP Domain Option
Domain
IPv6 Function
DNS
IP Filter Config – Filter Mode
IP Filter Config – Filter #0 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #0 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #1 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #1 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #2 Start Address You can specify the IP filter's start address.
IP Filter Config – Filter #2 End Address You can specify the IP filter's end address.
IP Filter Config – Filter #3 Start Address You can specify the IP filter's start address.
Description
You can change the administrator's password.
You can specify which interface to use.
Description
You can select whether or not to use the DHCP/BOOTP pro-
tocol.
You can select whether or not to use the RARP protocol.
You can specify the static IP address.
You can specify the subnet mask.
You can specify the gateway address.
You can specify the host name.
You can select whether or not to use the DHCP domain op-
tion.
You can specify the domain name.
You can select whether or not to use IPv6.
You can specify the DNS setting.
You can specify the IP filter operating mode.
219